|
Picture
|
Designation
|
Name
|
Description
|
 |
Cable 095
|
Mounting cable for CKPT 31 Lite
|
The cable is designed for connection of CKPT 31 Lite terminals to standard (factory installed) vehicle sensors, to DPT 5.2/ DPT 7.2/ DPT 77, as well as to DUT-E sensor. The length makes 2 meters.
The cable is included in the delivery set of terminals, but can be also delivered separately.
|
.png) |
Cable 006
|
Mounting cable for CKPT 31 Lite with service connector
|
The cable is designed for connection of CKPT 31 Lite terminals to standard (factory installed) vehicles sensors, to DPT 5.2/ DPT 7.2/ DPT 77, to DUT-E sensors, as well as to Service kit USB. The length makes 2 meters.
The cable is delivered separately.
|
 |
Cable 057
|
Service cable
|
The cable is designed for connection of Service kit USB to cable 006 without disconnection of the on-board terminal. The length makes 1 meter.
The cable is included into the delivery set of Service kit USB, but can be also delivered separately.
|
.png) |
Cable 084
|
Sensors cable extender
|
The cable is designed for extension of cable 076-01. The length makes 3 meters.
The cable is delivered separately.
|
 |
Cable 082
|
Service cable
|
The cable is designed for connection of Service kit to CKPT 45.
The cable is delivered separately.
|
 |
Cable 076-01
|
Sensors cable
|
The cable is designed for connection of DPT 5.2/ DPT 7.2/ DPT 77 sensors and DUT-E sensors to external devices (for example, vehicle data loggers CKPT 31, CKPT 21, etc.) via the external device cable. The length makes 8 meters.
The cable is included in the delivery set of fuel flow meters DPT 5.2, DPT 7.2, DPT 77, as well as fuel level sensors DUT-E, but can be also delivered separately.
|
.png) |
Kit 3
|
Sealing kit
|
The kit is designed for sealing resistive fuel level sensors.
The kit is included in the delivery set of DUT-P.
|
 |
Fuel pipe D=8 mm
Fuel pipe D=10mm
|
Fuel pipe
|
The fuel pipe is designed for fuel supply between the units of the fuel system.
The fuel pipe is sold by bunches (d=8 mm - bunch 100 m; d=10 mm - bunch 50 m).
|
  |
Shrink-wrap ТСТ 90 mm
|
Shrink-wrap
|
The shrink-wrap is designed for protection of sensors and meters from hostile environments.
The shrink-wrap is sold by linear meters.
|
 |
XRD NW 06 HL
|
Check valve Hansa Flex
|
The strong check valve (0,5 atm), made in Germany.
The check valve is designed for decreasing hydraulic shocks influence on sensors measuring accuracy.
|
 |
K3
|
Bypass valve
|
The strong bypass valve (1,5-2 atm).
The bypass valve is designed for discharging excess pressure in the fuel system on the output of the boost pump.
|
 |
KP2
|
Bracket for fastening DPT/DFM
|
Universal. 150х105 mm.
The bracket is fastened to the vehicle by bolts.
|
 |
KP1
|
Bracket for fastening DPT/DFM
|
120 х 60 х 30 mm.
The bracket is fastened to the vehicle by welding.
|
|
|
KT
|
Contactless key
|
The contactless key is designed for switching screens of DFM and CKPT 5/ CKPT 7.
|
.png) |
DCA
|
Converter of mechanical speed sensor
|
The converter is designed for data receiving in the form of electrical signals from the mechanical speed sensor. It is to be used in the vehicles with mechanical speedometer.
It can be also used in tractors with mechanical speedometer to receive the data on engine speed.
|
|
|
UC-1-90
UC-1-800
|
Interface unit
|
The interface unit is designed for connection of vehicle's dashboard fuel level indicators when you install fuel level sensor in the tank instead of the factory installed (standard) sensor.
UC-1-90 - resistance range 0-90 Ohm.
UC-1-800 - resistance range 185-800 Ohm.
|
|
.png)
|
PL1
|
Seal strap
|
The seal strap is designed for elimination of unauthorized disconnections from CKPT 21 Lite.
|
|
|
PL2
|
Seal strap
|
The seal strap is designed for elimination of unauthorized disconnections from CKPT 21 Lite GPS.
|
|
.png)
|
Prop
|
Prop for DUT-E
|
The prop is designed for decreasing measuring tube vibration.
|
