Vehicle tracking & Fuel monitoring
Device CKPT 45
Function
Vehicle tracking device CKPT 45 is designed for real-time GPS vehicle tracking and transmission of information about vehicle’s operating parameters to the server ( vehicle tracking).
The device has a large number of inputs designed for standard and accessory sensors, including fuel flow meters and fuel level sensors.
The presence of CAN BUS allows you to get the vehicle’s operating parameters directly from the engine control unit. It is also possible to carry out real-time diagnostics of engine failures.
Vehicle tracking device CKPT 45 is a high end terminal designed for companies that need reliable and efficient fleet monitoring.
Advantages
- Record number of inputs;
- Inputs are optimized for working with widespread vehicle sensors (frequency and voltage optimization);
- 2 triggered outputs protected from short circuit;
- Mechanical protection from unauthorized disconnections;
- Accurate and reliable GPS-receiver Trimble;
- Data transmission via GPRS and SMS both in home network and in roaming;
- Extended temperature range;
- Extended range of power supply;
- Simple, reliable and efficient protocol of data transmission to the server;
- Simultaneous work with several types of reports;
- Possibility of remote control via SMS;
- Data preprocessing directly in the terminal, providing optimal server loading as well as traffic minimization;
- Strong metal case.
Warranty
24 months
Mean time between failures (MTBF) is no less than
10 000 hours
Mean lifetime is no less than 10 years
CKPT 45 uses IPM protocol for data transmission to the server
see also Moderate priced vehicle tracking device CKPT 25 |
.png)
Maximum in vehicle tracking
Inputs
- Engine speed (RPM);
- Vehicle speed;
- Fuel flow meter (pulse signal);
- Fuel level sensor (analog signal);
- On-board power supply;
- Oil pressure;
- Engine temperature;
- Outdoor temperature;
- Indoor temperature;
- Axle load;
- Signal lamps;
- Doors opening;
- Locking differential.
Triggered outputs
2 outputs, current up to 1 A (24 V)
Specifications
|
Supply voltage
|
9-50 V, short-term up to 100 V
|
|
Operating temperature range
|
from -40 to +60 îÑ
|
|
RS-232 Interface, pcs
|
1
|
|
CAN 2.0 Interface, pcs
|
2
|
|
Overall dimensions, mm
|
92õ187õ35,5
|
|
Weight, kg
|
0,5
|
|
Number of inputs
|
analog - 7; pulse - 3; quantized - 3
|
|
Buffer memory, Mb
|
3 (24 000 reports)
|
|
Data transmission rate
|
from 1 to 3 600 reports per hour
|
|
