|
Installation kits for fuel flow sensors & meters
Function
Advantages
1. Nipples, valves, angle piece bolts have holes for sealing;
2. High-quality components:
- seal rings (D18-055F) and seal washers (08 Cu) are made from high-quality soft copper (not aluminium!!!),
- angle pieces are made from steel (not aluminium!!!),
- check valve is pressure proved,
- installation kit components have protection from corrosion.
We would like to stress that the quality of installation and sensors operation depend on components!!!
|
|
Installation kits include
The manufacturer reserves the right to induce amendments to the delivery set, as well as replace components with similar ones without prior notification of the customer.
|
Picture
|
Designation
|
Name
|
Description
|
KitNo 2
|
KitNo 9
|
KitNo 10
|
.png) |
Bolt 026
|
Angle piece bolt
|
It is designed for fuel line connection with the units of the fuel system - high pressure fuel pump and final filter.
|
3 pcs
|
2 pcs
|
3 pcs
|
|
.png)
|
Bolt 027
|
Angle piece bolt
|
It is designed for connection of two branches of the the fuel line with the units of the fuel system - high pressure fuel pump and final filter.
|
1 pc
|
1 pc
|
-
|
|
|
Bolt M8х16
|
Bolt
|
It is designed for fastening the sensor/meter to the bracket.
|
4 pcs
|
4 pcs
|
4pcs
|
|
|
Nut М8
|
Nut
|
It is designed for fastening the sensor/meter to the bracket.
|
4 pcs
|
4 pcs
|
4 pcs
|
|
|
Washer 8
|
Washer
|
It is designed for fastening the sensor/meter to the bracket.
|
4 pcs
|
4 pcs
|
4 pcs
|
|
|
Washer 8.65 G
|
Lock washer
|
It is designed for fastening the sensor/meter to the bracket.
|
4 pcs
|
4 pcs
|
4 pcs
|
|
|
Washer CU D-18
|
Seal washer (copper)
|
It is designed for sealing conjunctions between the components.
|
16 pcs
|
14 pcs
|
11 pcs
|
|
|
Washer CU 2026
|
Seal washer (copper)
|
It is designed for sealing conjunctions between the components on the final filter.
|
1 pc
|
-
|
1 pc
|
|
|
Seal
|
Plastic seal
|
It is designed for fuel pipes sealing.
|
8 pcs
|
6 pcs
|
6 pcs
|
|
|
K1
|
Check valve
|
It is designed for decreasing hydraulic shocks influence on sensors measuring accuracy (white valve).
0,35-0,5 Atm
|
1 pc
|
1 pc
|
1 pc
|
|
|
K2
|
Bypass valve
|
It is designed for discharging excess pressure in the fuel system on the output of of the boost pump.
|
1 pc
|
-
|
-
|
 |
TR 8
|
Angle piece
|
It is designed for connection of fuel pipes with the components.
|
8 pcs
|
6 pcs
|
4 pcs
|
|
.png)
|
GB-612
|
Fuel filter
|
It is designed for installation behind the final filter before the DPT sensor.
|
1 pc
|
-
|
-
|
|
|
Connection clips 008
|
Connection clips
|
It is designed for fixation of fuel pipes on the angle piece or filter GB-612.
|
10 pcs
|
6 pcs
|
4 pcs
|
|
|
Nipple 012
|
Reducer-nipple duplex
|
It is designed for connection of the fuel line with the return line via the bypass valve.
|
1 pc
|
1 pc
|
-
|
|
|
Nipple 015
|
Reducer-nipple single
|
It is designed for bending the return line from the final filter via the bypass valve.
|
1 pc
|
-
|
1 pc
|
|
|
Nipple 016
|
Reducer-nipple single
|
It is designed for connection of the fuel line with the starting heater.
|
1 pc
|
-
|
-
|
|
|
Nipple 016-01
|
Reducer-nipple duplex
|
It is designed for connection of two branches of the fuel line with the strating heater.
|
1 pc
|
-
|
-
|
 |
Plug
|
Threaded plug
|
It is designed for plugging the return line from the high pressure fuel pump.
|
1 pc
|
1 pc
|
1 pc
|
Back to list
.jpg)